About Us

It’s best to wash the roof once a year. The dirt and debris collected can catch water and can cause an ice dam on your roof, which will lead to leaks in your roof. By washing your roof regularly—unlike simply hosing it down with bleach or pressure washing every 3-5 years—you are not only protecting it from leakage but you are also making sure that any moss growth is removed completely before it has time to penetrate any deeper into mortar joints or shingles. This way, you’ll never have trouble spots reappearing after simply hosing them off again. Whether cleaning just your metal flashing for now or completely powerwashing the gutters along with scraping away dry leaves up there, the better care of

Ambassador Window Cleaning provided us with this amazing content! You can visit them here: https://awc.cc/.

The answer is yes, but you should always wear safety gear, including a harness & lanyard for safety against fall protection, gloves and eye protection.

It’s always best to use a low-pressure power washer with a narrow spray nozzle that can effectively remove dirt without damaging your roof. Keep away from the edge of the roof where runoff water could accumulate and cause damage around eaves or trims.

We also recommend using cold rinse water for cleaning roofs. Hot water can start peeling paint off trim boards or other wooded areas near your home because it heats up the surface so quickly to above 130°F! And high-powered pressure washing can spray paint chips to other buildings, which is really annoying!

When you soft wash a roof, an eco-friendly cleaning solution is sprayed onto the surface of the roof. It then gently penetrates the top layer to dislodge any accumulated dirt and debris (which would be removed by sweeping it away). Soft wash cleaning also helps to protect against mold, mildew and algae growth so roofs stay cleaner longer.

The process has numerous benefits which include diminished airborne dust particles, shortened dry time, decreased water usage for cleaning up afterwards, improved curb appeal with cleaner homes in neighborhoods. The downside includes the cost factor for this service. It typically costs between $300-$700 per 1800 sq/ft residence.

This was provided to us from Peter’s Pressure Washing in Tampa, FL.

There are several factors that go into power wash roof costs. The price will vary depending on the size and complexity of the job.

Roofs that are experiencing moss, mold, or fungal growth will be more expensive than roofs that just need basic cleaning with soap and water. Roofs that are flat will also take less time to clean up compared to other shapes. On average it can cost between $100 and $400, depending on the size and complexity of your roof. It’s best to get an estimate from a professional this way that it won’t turn into a surprise charge.

This answer was provided by Glass Act Pro Wash!

Before hiring a roof washing company, you should ask some questions such as what type of cleaning products will be used? What side effects can occur from those products?

The next question to ask is if the company provides full on-site maintenance and care, or just a one-time service. Ask for references and do some research on the internet. There may even be reviews on social media which can help you decide on whether this is an appropriate company for your needs. Check this out if you’re looking for roof washing near me.

Special thanks to Trocpical Window Cleaning for sharing this content!

It depends on the type of roofing material. If you have a metal, asphalt, or cement tile roof then pressure washer is your best choice. If you have a shingle or slate roof, then soft wash roof cleaning with soap and water would be recommended because these roofs are made from more fragile materials. If you are still debating which one is better for your roof, it’s probably a good idea to get it checked out by a professional to see what they’d recommend.

Thanks to Fire House Pressure Washing for sharing this insightful information!

I would recommend hiring a professional soft washing service to wash your house rather than risking damage or dirtiness by doing it yourself. The chemicals in normal washing detergents are not made for use around unprotected skin, which can lead to irritation and even burns under unfortunate circumstances. Soft washing, on the other hand, uses natural products; water-based cleaning agents that are safe when used with open eyes. Another benefit to this process is that soft washing removes many harmful substances from your home’s surface including dust, mold spores, animal dander, bacteria, and viruses – all without physical contact with any surfaces or things in your house. For these reasons I would say hire an independent contractor who does soft washing!

Special thanks to Revive Power Washing for sharing!

When it comes to pressure washer technology, soft wash uses a milder stream of water and has a tenderizing effect. When you use a light air injection wand in conjunction with the right cleaning product, soft washing achieves difficult-to-remove surface soils like pesticides. Meanwhile, power wash is more suited for tough stains and built-up dirt and grime. The main difference between the two when it comes to practical use is that when you’re using too much force on your ground’s surface structure with power washing, you’re running the risk of damaging it in the long term whereas this isn’t true for soft cleaning. Thanks to Peter’s Pressure Washing for sharing this incredible information!

Short answer, roof pressure washing can be used as a cleaning method. Alternatively, soft washing provides a healthier and more sustainable option for both roofs and homeowners. Soft wash systems use environmentally friendly degreasers, soapy water, and pressure water sprayers to clean the surface of the roof without harming fragile shingles or causing leaks.

Yes, power wash roof is commonly referred to as a pressure wash. All it means is the use of high-pressure water to clean things with soap and hot water. But typically, power washing is using hot water to clean instead of just regular pressurized water. A power wash can be used on most surfaces including exterior walls, asphalt, brick & block patios or walkways, decks & stairs, railings, or trellises – everywhere that needs a deep cleaning.

Soft washing can be used for more than just your roof. You can use it for soft wash house cleaning! The benefits of a soft wash process include a reduced amount of water usage, reduced chemical use and power required following the wash, no damage from harsh chemicals or washer shut offs from frame or insulation that result in costly repairs. The gentlest procedure for cleaning dirty homes is the wire brush high pressure system capable of removing 1000 grit sanding marks on concrete without wire brushing. It also removes paint residue, tree sap and tar effortlessly.

Roofs are tricky because if the roof just needs a dusting, it’s smarter to use a soft wash roof approach. The decision to use pressure wash should be based on the carbon content of the roof tar. The high-carbon roofs may lead to environmental degradation through increased amounts of soot deposited in soils and water sources, while low-carbon roofs have minimal impacts related to atmospheric deposition. Pressure washing can increase this pollution level by distributing soot from elevated heights onto other surfaces not expected with natural gravity distribution. Thus, when choosing between pressure and soft hatch approaches, make sure you take both your budget and environment into consideration! Special thanks to our friends at Blue Flamingo SoftWash for this insightful information!

Yes, a pressure washer can be used for pressure washing roof tiles, but it’s important that roof tiles are not pressure washed with too much pressure. Too much pressure can shatter the thin surface of the tile. Pressure washers operate in different modes, and when using one to clean your roof, set the spray nozzle to the most gentle setting possible. Any potential damage to your roof should be covered by insurance so there would be no financial downside to being more cautious. And though caution is key when cleaning a shingle or slate gets wet enough for water bubbles start forming inside this material, they will eventually pop out again on their own with little noticeable effect on them after they dry out again. But if too high of a force were used while trying to remove dirt from these surfaces then it could possibly damage your tiles. This information was provided by Green and Clean Professionals!